Production Equipment » Soldering Stations

Taiyo RX-802AS Soldering Station

mfr Code: Taiyo RX-802AS

Weight: 2.1 Kg

Taiyo RX-802AS Soldering Station

Click on the image to enlarge

Taiyo RX-802AS Lead free Soldering Station Tip change system
RX-802AS 1 - 3 units £264.00 ex. VAT
RX-802AS 4 - 6 units £246.00 ex. VAT
RX-802AS 7 - 10 units £246.00 ex. VAT

About the Product

The Taiyo RX-802AS is the most advanced temperature controlled Lead free Soldering Station available. It features a very high power output (72 watts) packed into a very compact slimline handpiece with a warm up time to working temperature of less than six seconds. The RX-802AS offers a wide range of advanced programmable features including sleep and shutdown functions, solder time alarm, and high/low temp. alarms. Restart from sleep mode is initiated by touching the tip onto the wet sponge in the tool stand. Tips can be changed in seconds using the Taiyo patented slide change system. A small slide lever is built into the handpiece handle. When this is slid forward, the integrated tip/heater unit is pushed out of the handpiece. it can then be easily removed by holding and pulling the plastic housing of the tip/heater. The operator does not come into contact with hot components of the tip at any time. The required replacement tip/heater unit is then plugged in. For safety, tip heating does not start until the unit's on/off switch is cycled. Because of the speed and ease of tip change, one station can be used for a range of soldering operations on one job, rather than re-handling a batch of boards. The RX-802AS incorporates a patented soldering time alarm which sounds if the tip is left in contact with the component for longer than a specified time (programmable). Components of known time temperature sensitivity can be protected and statistical reliability of assemblies improved. All the stations have a calibration function so that the same peak temperatures are presented to the assembly through all operators. The RX-802AS shows outstanding heat recovery. A compact high output Nichrome heater combined withna high sensitivity temperature sensor at the tip means there is almost no temperature fluctuation during heavy load continuous soldering operations even on high thermal mass assemblies.

Product Downloads